Structural drying in Pinecrest, FL
A dry-looking floor isn't a dry house. Water soaks into drywall, framing, subfloors and concrete, and it has to be pulled out of the structure itself before anything is closed up or replaced.
How drying works
Air movers push dry air across wet surfaces, and dehumidifiers pull that moisture out of the air so it doesn't settle back into the house. Most homes dry in about 3 to 5 days. Wood floors, concrete slabs and water that sat a long time take longer.
Dry means the readings in the wet areas match readings in dry areas of the same material. We check at every visit and move equipment as areas dry.
What's included
- Moisture map of every wet room before drying starts
- Air movers and dehumidifiers placed for the room and material
- Wall cavities opened or vented where they can't dry closed
- Readings at every visit, recorded
- Equipment out when the readings say dry, not before
How the job runs
- Assessment
We find the source, make sure it's stopped, and map how far the water spread with moisture meters.
- Extraction
Standing water comes out with pumps and wet vacuums. Furniture and belongings move to a dry spot.
- Drying and dehumidifying
Air movers and dehumidifiers run for days. We take readings each visit until the structure is dry.
- Cleaning and sanitizing
Everything the water touched is cleaned. Contaminated water gets extra cleaning and safety steps.
- Repair and rebuild
Drywall, flooring, trim and cabinets that had to come out are replaced once the readings say dry.
What it costs
Every job is different, so these are typical ranges, not a quote. What moves the price is how much water there was, how long it sat, what kind of water it was, and which materials got wet.
| Job | Typical range |
|---|---|
| Most water damage jobs | $1,500 to $7,500 |
| Severe damage: several rooms, water that sat for days, flood or sewage water, rebuild work | $15,000 and up |
When the damage is sudden and your policy covers it, like a burst pipe, insurance usually pays for the covered work and you pay your deductible. Your written estimate comes after the assessment.
Leave the equipment running
The equipment is loud and it's in the way. Turning it off or moving it slows drying and can leave damp spots behind. If it's a problem, call us and we'll talk through the options.
Why homeowners call us
We stop the source first
Drying a room while the leak is still running doesn't work. We find the source and get it stopped, and we tell you when you need a plumber, roofer or electrician.
Dry before we repair
Nothing gets closed up until the moisture readings say the structure is dry. Covering damp drywall or subfloor is how mold starts.
Readings in writing
We record moisture readings at every visit and photograph the damage and the work. That record is what your insurer will ask for.
Plain updates
You'll know what's being removed and why before it comes out, what the readings say, and what happens next.
Where we work
Structural drying questions
How long does drying take?
Most homes dry in about 3 to 5 days with air movers and dehumidifiers running. Wood floors, concrete and water that sat for a long time can take longer. We take readings each visit and stop when the structure is dry, not on a set day.
How long does structural drying take?
It depends on how much water the materials absorbed and how humid the air is. Drying often takes several days, and we check readings at each visit until the structure is dry.
Can I turn off the drying equipment?
Please leave the equipment running as placed. Turning it off or moving it slows the drying and can leave damp areas behind. If equipment is loud or in the way, call us and we will talk through the options.
How do you know when a wall is dry?
We use moisture meters to take readings inside the wall and in nearby dry areas for comparison. When the readings in the wet area match the dry areas, the structure is ready for repair.
Other services
Water in the house right now?
Call and tell us what happened. We'll tell you what to do first and when we can be there.
786-589-9026