Water in the house? Call now.
We get the water out, dry the walls and floors until the readings prove it, and repair what got soaked. Mold can start in 24 to 48 hours, so the clock is already running.
Every hour the water sits, the job gets bigger
Water soaks into drywall, wood, cabinets and carpet pad, and it travels under baseboards and behind walls. Water that comes out within hours touches fewer materials than water that sat for days. Wet materials left more than 24 to 48 hours can start growing mold.
Fast extraction and proper drying are what keep a $2,000 job from becoming a $15,000 one.
Signs of water you can't see
- Standing water, or a stain spreading on a ceiling
- A musty smell in a room that used to smell fine
- Paint that bubbles, or drywall that feels soft
- Wood floors cupping, laminate swelling at the joints
- A water bill that jumped with no change in use
From the first call to dry
- Assessment
We find the source, make sure it's stopped, and map how far the water spread with moisture meters.
- Extraction
Standing water comes out with pumps and wet vacuums. Furniture and belongings move to a dry spot.
- Drying and dehumidifying
Air movers and dehumidifiers run for days. We take readings each visit until the structure is dry.
- Cleaning and sanitizing
Everything the water touched is cleaned. Contaminated water gets extra cleaning and safety steps.
- Repair and rebuild
Drywall, flooring, trim and cabinets that had to come out are replaced once the readings say dry.
What water damage restoration costs
Every job is different, so these are typical ranges, not a quote. What moves the price is how much water there was, how long it sat, what kind of water it was, and which materials got wet.
| Job | Typical range |
|---|---|
| Most water damage jobs | $1,500 to $7,500 |
| Severe damage: several rooms, water that sat for days, flood or sewage water, rebuild work | $15,000 and up |
When the damage is sudden and your policy covers it, like a burst pipe, insurance usually pays for the covered work and you pay your deductible. Your written estimate comes after the assessment.
What we do
Water damage restoration
The whole job: source, water out, drying, cleanup and repairs.
See the jobEmergency water extraction
Standing water pumped and vacuumed out before it soaks in.
See the jobFlood damage cleanup
Storm and outside water, treated as contaminated and cleaned out.
See the jobBurst pipe water damage repair
Water out and rooms dried while a plumber fixes the pipe.
See the jobMold remediation
Contained, removed and cleaned, with the moisture source fixed.
See the jobStructural drying
Walls, floors and framing dried to readings, not by feel.
See the job
Why homeowners call us
We stop the source first
Drying a room while the leak is still running doesn't work. We find the source and get it stopped, and we tell you when you need a plumber, roofer or electrician.
Dry before we repair
Nothing gets closed up until the moisture readings say the structure is dry. Covering damp drywall or subfloor is how mold starts.
Readings in writing
We record moisture readings at every visit and photograph the damage and the work. That record is what your insurer will ask for.
Plain updates
You'll know what's being removed and why before it comes out, what the readings say, and what happens next.
Where we work
What people ask us
What should I do first when I find water damage?
Stop the water: shut off the main valve or the valve at the appliance. If water is near outlets or appliances, turn off power to that room, but only if you can reach the breaker without standing in water. Take photos before you move anything, move what you can to a dry spot, and call us.
How fast can someone get here?
Call 786-589-9026. We'll ask what happened and where, tell you what to do right now to limit the damage, and tell you on that call when someone can be there.
Will insurance cover it?
Often, yes. A standard homeowners policy usually covers sudden, accidental water damage from inside the house, like a burst pipe or a failed supply line. Slow leaks that went on for weeks, wear, and flood water from outside are usually not covered. Check your policy or call your agent.
Will I get mold?
Mold can start growing on wet drywall, wood and carpet within 24 to 48 hours, and South Florida humidity helps it along. That's why drying starts as soon as the water is out. If you already see mold or smell a musty odor, tell us when you call.
Before you hire anyone
How water damage restoration works in Pinecrest
Water damage restoration starts with stopping the water. If a pipe has burst or an appliance hose has failed, the first step is to shut off the water at the main valve or at the appliance, and to turn off power to any room where water is near outlets or appliances. Once the source is under control, we remove standing water with pumps and wet vacuums, and we move furniture, rugs, and belongings to a dry area so they can be checked and cleaned. Next we look for water that has soaked into places you cannot see. Water runs under baseboards, behind walls, under flooring, and into the padding under carpet. We use moisture meters to map how far the water has spread, and we note which materials are wet and which are still dry.
That map guides the drying plan, because drying only the surface leaves damp material behind. Drying uses air movers to push dry air across wet surfaces and dehumidifiers to pull moisture out of the air. Equipment runs for days, not hours, and we return to check moisture readings until the structure is dry. Materials that cannot be dried safely, such as soaked drywall or swollen particle board, are removed so they do not trap moisture. Only when the rooms are dry do repairs begin, such as replacing drywall, flooring, or trim. Throughout the job we explain what is happening and why, and we keep a record of the readings and the work done.
Signs you need water damage restoration
Some water damage is easy to see, such as standing water on a floor or a stain spreading across a ceiling. Other signs are quieter and easy to miss. A musty smell in a room that used to smell fine often means water is sitting somewhere out of sight, such as under flooring or behind a wall. Paint that bubbles or peels, wallpaper that lifts at the edges, and drywall that feels soft when you press it are all signs that water has soaked into the material. Floors can tell the same story. Wood floors may cup or buckle, laminate may swell at the joints, and tile grout may darken in one area.
A sudden rise in a water bill with no change in use can point to a hidden leak, and a warm spot on a floor can point to a leak in a hot water line. Outside, look for water pooling near the foundation after rain, gutters that overflow, and soil that stays wet long after other areas have dried. Inside, check under sinks, behind the washing machine and dishwasher, around the water heater, and in the air conditioning closet, because these are the places where slow leaks start. If you find any of these signs, it is worth having the area checked with a moisture meter. Finding a leak early often means a smaller drying job and less repair work later. Waiting usually means the water spreads further and the repair grows.
What changes the scope of a water damage job
No two water damage jobs are the same, because several things change how much work is needed. The first is how long the water has been sitting. Water that is removed within hours usually affects fewer materials than water that has sat for days, because drywall, wood, and carpet padding absorb more water over time. The second is how much water there is and how far it spread. A small leak under a sink may affect one cabinet, while a burst pipe on an upper floor can send water through ceilings and into rooms below. The third is the type of water.
Clean water from a supply line is simpler to deal with than gray water from a washing machine or dishwasher, and both are simpler than water that has come from a sewer backup or from flooding outside, which needs extra cleaning and safety steps. The fourth is the materials involved. Tile and concrete dry more easily than carpet, wood floors, and drywall, and some materials must be removed rather than dried. The fifth is the layout of the home. Water in a single story home on a slab spreads differently than water in a two story home, where it can travel between floors. The sixth is whether mold growth has started, because that adds containment and cleaning steps. When we inspect a job we look at all of these factors, and we explain which of them apply to your home so you understand why the plan is what it is.
Water damage and South Florida weather
Pinecrest and the rest of South Florida bring a set of conditions that make water damage common. Summer brings heavy rain, often in short, hard downpours that can overwhelm gutters and drains. Tropical storms and hurricanes can drive rain under roof tiles, through windows, and into homes through doors and vents. High humidity is present for much of the year, which means wet materials dry slowly on their own and damp rooms can stay damp for a long time. Many Pinecrest homes were built decades ago, with plumbing, roofs, and air conditioning systems that have seen many seasons of heat and rain.
Older copper and galvanized pipes can corrode, roof tiles can crack or shift, and air conditioning drain lines can clog, sending condensate water into ceilings and walls. Flat or low slope roofs, common on older Florida homes, can hold water after a storm if drains are blocked. Large lots with mature trees mean roots can press on underground lines, and heavy rain can push groundwater toward foundations. After a storm, it is worth checking the attic, the rooms under the roof, and the areas around windows and exterior doors, even if nothing looks wet at first. Water often travels along beams and pipes before it shows up as a stain, so a check after heavy rain can catch a problem before it grows.
How to choose a water damage company in Pinecrest
Choosing a water damage company is easier when you know what to ask. Start by asking what the first visit includes. A good first visit should find the source of the water, map how far it spread with moisture readings, and explain the plan in plain language before any drying equipment is set up. Ask how the company will know when the job is dry. Moisture readings taken over several days give a clear answer, while a guess based on how the surface feels does not.
Ask what will be removed and what will be kept, and ask to be told before anything is taken out. Ask how the company protects the parts of your home that were not affected, such as covering floors on the path to the work area and containing dust when drywall is cut. Ask who will be in your home and how you will be kept updated, because a water damage job can run for several days and you should know who to call with a question. Ask what happens if the source of the water needs a plumber, a roofer, or an electrician, and whether the company will explain that and help you plan the next step. Finally, ask for the plan in writing, with the steps, the equipment, and the checks that will be done. A company that is clear about the plan, the readings, and the updates is easier to work with, and it leaves you with a record of the work that was done.
Water in the house right now?
Call and tell us what happened. We'll tell you what to do first and when we can be there.
786-589-9026